Topic Closed)
Members
Search
Register
Login
Posted: March 24, 2009 at 8:45 PM / IP Logged
You will have to trim. But there are double din kits availible for that truck to secure it.
Posted: March 24, 2009 at 10:15 PM / IP Logged
Posted: March 24, 2009 at 10:51 PM / IP Logged
Autoware302 on ebay had them in there store. $4.99 i think that included shipping. type in "2003 ford f250 double din dash kit" and they will pull right up. Also any local shop should be able to get them and you may be get lucky and they will have it in stock.
Posted: March 24, 2009 at 10:58 PM / IP Logged
Posted: March 25, 2009 at 1:55 PM / IP Logged
It is pretty much the exact same as a single din. Just a bigger case that it is in. The kit will be very thin all the way around it. Get the kit and radio. Test fit it in and then see what clearance issues you have. Then make your plan for triming the stock bezel to make it fit correctly.
Posted: March 25, 2009 at 2:21 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Tuesday, April 23, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Tuesday, April 23, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
