Driver's Door Unlock Wire for 97 Mustang

Home / the12volt's Install Bay / Car Security and Convenience / Driver's Door Unlock Wire for 97 Mustang (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

audio Xclusive

Member - Posts: 30

Joined: April 12, 2002

Location: United States

Posted: June 05, 2002 at 9:18 PM / IP Logged

I need to know what color and where I can find the wire that will unlock only the driver's door on a 97 Ford Mustang.

another Xclusive installation

Back to Top

Search for other posts by audio Xclusive

Zezzar

Member - Posts: 18

Joined: June 06, 2002

Location: United States

Posted: June 06, 2002 at 2:16 AM / IP Logged

NOT A CHANCE,IN ORDER TO DO DRIVER'S ONLY YOU NEED TO OPEN THE DRIVER DOOR AND DO A REVERSE POLARITY AT THE DOOR LOCK MOTOR WIRES,REASON WAY IS BECAUSE DRIVER'S DOOR MOTOR COMES FROM THE SWCH ON SIDE THE DOOR AND IT WONT GO IN THE CAR I WILL SAY IS PINK/BLACK.

NOW IF THE CAR GOT A KEYLSS ENTRY GO YO THE MODULE IN THE TRUNK AT THE DRIVER SIDE AN IS THE SAME COLOR WIRE ,BUT IF THAT IS THE ISSUE YOU CAN ALWAYS UPGRADE THE SYSTEM AND IS NO NEED FOR DRIVER'S PRIORITY.

Back to Top

audio Xclusive

Member - Posts: 30

Joined: April 12, 2002

Location: United States

Posted: June 06, 2002 at 7:01 AM / IP Logged

thank you, I thought it was hopeless for a minute. The car does have factory keyless, so can I run the 3rd channel output right to the pink and black wire in the trunk.

another Xclusive installation

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: June 06, 2002 at 8:20 AM / IP Logged

You can run a new wire to a add on door lock actuator that will only lock/unlock the driver door. This is alot more work but it will work.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

audio Xclusive

Member - Posts: 30

Joined: April 12, 2002

Location: United States

Posted: June 06, 2002 at 8:52 PM / IP Logged

all good ideas thank you

Back to Top

Zezzar

Member - Posts: 18

Joined: June 06, 2002

Location: United States

Posted: June 07, 2002 at 1:35 AM / IP Logged

wellcheck this out , see this with keyless ,the factory remote does the trick for first door priority if you if you do and upgrade alarm ,,,,,now if you are going to do an alarm with remotes than easy :in the driver kik panel is a plug acctually there are two but in one of them is the pink/black but still you need to do a reverse polarity relay to do that,ok now depend on the brand of alarm you are using the alarm may be have a program for doble pulse unlock if not you can use 2nd 3rd 4rd chanel

Back to Top

Zezzar

Member - Posts: 18

Joined: June 06, 2002

Location: United States

Posted: June 07, 2002 at 1:41 AM / IP Logged

i forgot the plugs are really up high in there so whit a panel pup tool pull them down to be reachable dont have to go to trunk.

i will sugest that you use first unlook pulse for drivers and then any other chanel for the other door,may be use trunk pup whit 3rd chanel,wire is PURPLE / yelloy in drivers kik panel,,,,,sorry if i say too much

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Driver's Door Unlock Wire for 97 Mustang

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.