wireing diagram for pt cruser
Welcome Guest :)
drinkenbuddie
Member -
Posts: 8
Joined: May 01, 2002
Location: United States
Posted: June 04, 2002 at 11:11 PM / IP Logged
Hey I have an alarm and want to put it in a pt crusier and I looked just like I did for my truck and you guys had it for my truck but no go for newer cars What's up. So it's a band new one 2002 pt crusier.
Please help!!!!!!!
Velocity Motors
Moderator -
Posts: 12,488
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: June 04, 2002 at 11:23 PM / IP Logged
Chrysler | PT Cruiser | 2001-2002 |
Remote Starter Wiring Colors and Notes |
Function | | | Vehicle Color | Location |
Start: | | | YELLOW | IGNITION SWITCH HARNESS * |
Ignition #1: | | | BLUE | IGNITION SWITCH HARNESS |
Ignition #2: | | | BLACK/ ORANGE (HEAT/AC) | IGNITION SWTICH HARNESS |
Ignition #3: | | | N/A | |
Accessory: | | | BLACK/ WHITE (RADIO) | IGNIITON SWITCH HARNESS |
Brake Light: | | | WHITE/ TAN | AT SWITCH ABOVE BRAKE PEDAL |
Tach Signal: | | | DK. BLUE/TAN | AT COILS |
Parking Lights: | | | BLACK / YELLOW (+) | AT LIGHT SWITCH |
Headlights: | | | VIOLET/WHITE (+) | AT LIGHT SWITCH |
OEM Alarm Disarm: | | | DK. GREEN | IN DRIVER'S DOOR **** |
OEM Alarm Arm: | | | DK. GREEN | IN DRIVER'S DOOR **** |
Diesel Glow Plug: | | | N/A | |
Clutch Bypass Wire: | | | N/A | |
Notes: | | * This Vehicle Is Equipped Wiith Chrysler's Smart Key Engine Immobilizer. |
Chrysler | PT Cruiser | 2001-2002 |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | | Vehicle Color | Location |
Constant +12 Volts: | | | PINK/BLACK | IGNITION SWITCH HARNESS |
Starter Kill: | | | YELLOW | IGNITION SWITCH HARNESS * |
Ignition +12 Volts: | | | BLUE | IGNITION SWITCH HARNESS |
Dome Lights/Superv: | | | TAN (DRIVER'S) | DK. BLUE/ORANGE (ALL OTHERS) ** |
OEM Horn: | | | RED / BLACK (-) | STEERING COLUMN HARNESS |
Power Lock: | | | WHITE/ DK. GREEN | UPPER KICK PANEL *** |
Power Unlock: | | | WHITE/ DK. GREEN | UPPER KICK PANEL *** |
Trunk Release: | | | N/A | FOLLOWS DOOR LOCKS |
Alarm Input Wire: | | | TAN (DRIVER'S) | DK. BLUE/ORANGE (ALL OTHERS) ** |
Notes: | | Of The Doors. A Negaive Pulse Through A 2.7 K-Ohm Resistor Will Arm The Factory Alarm |
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
drinkenbuddie
Member -
Posts: 8
Joined: May 01, 2002
Location: United States
Posted: June 06, 2002 at 2:44 AM / IP Logged
Hey there buddie thanks I sure like that and hope I can do something for you some day. I gots to go install me an alarm!!!!!!!
Velocity Motors
Moderator -
Posts: 12,488
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: June 06, 2002 at 8:24 AM / IP Logged
Good luck and Here's a little more info for the 2002 PT Cruiser:
- HATCH trigger : TAN/BLACK ( driver's kick )
- Driver side door trigger : TAN
- All other door trigger : BLUE/ORANGE ( Passenger kick panel )
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Q2Installs
Member -
Posts: 16
Joined: May 18, 2002
Location: United States
Posted: June 13, 2002 at 11:27 PM / IP Logged
Thanks for your help guys....That is a big help....Why don't you guys list resistor levels though in your tech notes? Just curious
Thanks again......
Q
Velocity Motors
Moderator -
Posts: 12,488
Joined: March 08, 2002
Location: Manitoba, Canada
Follow the12volt.com
Friday, May 10, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.