the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

subs cutting out


Post ReplyPost New Topic
< Prev Topic Next Topic >
audionut39 
Member - Posts: 15
Member spacespace
Joined: May 28, 2009
Location: Ohio, United States
Posted: June 11, 2009 at 1:36 PM / IP Logged  
this one has me stumped.I have a sony head unit,a dual amp for my 6x9's and a punch 401s running 2 memphis 15''pr's.when i turn it up where the bass really starts to hit the subs will cut out and if i turn it down a little they come back on,however if i fade all the way to just the subs i can hit them as hard as i want.
joch1314 
Copper - Posts: 301
Copper spacespace
Joined: March 25, 2008
Location: Texas, United States
Posted: June 11, 2009 at 3:23 PM / IP Logged  
Check your remote and battery voltage on the 401s when the subs fade out.  Also check your ground connection.  How many RCA outputs does your deck have?  How do you have the 15's wired to the rockford amp? Dual or single voice coils, and what impedances are we working with?
...half of the truth can be worse than a lie. <----Roger Russell said that..
audionut39 
Member - Posts: 15
Member spacespace
Joined: May 28, 2009
Location: Ohio, United States
Posted: June 11, 2009 at 3:39 PM / IP Logged  
deck has 1 set that im running punch on.wire outputs to other amp.subs are dual 4.running to 4 ohm load bridged.just changed all the wiring to 4g.think its in the battery or alt....
joch1314 
Copper - Posts: 301
Copper spacespace
Joined: March 25, 2008
Location: Texas, United States
Posted: June 11, 2009 at 4:08 PM / IP Logged  
connect the RCA's to the other amp and crank it.  If that one drops out then there is something wrong with the output on the deck or the RCA's.  More than likely the deck though!  It also might be your charging system like you stated, which is why you need to test voltage when volume drops.
...half of the truth can be worse than a lie. <----Roger Russell said that..
audionut39 
Member - Posts: 15
Member spacespace
Joined: May 28, 2009
Location: Ohio, United States
Posted: June 11, 2009 at 4:42 PM / IP Logged  
tested voltage and the 6x9 amps voltage is dropping off.the punch amp isnt.hooked up other hu i had layin around and same thing.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer