compustar issues

Home / the12volt's Install Bay / Car Security and Convenience / compustar issues (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sik96teg

Member - Posts: 4

Joined: December 17, 2008

Location: New Mexico, United States

Posted: June 13, 2009 at 8:04 PM / IP Logged

I just finished installing the compustar CM1000A. i cant get the my remotes setup on it. i did the whole turning igmition on,off 5 times and no response from the alarm i believe it is suppose to flash the lights twice and nothing. i can hear the relay clicking every time i turn the key i even removed the alarms ignition wire and was touching it to 12v to try it that way. Also the alarm is armed not disarmed so i have my door trigger pressed in so it doesnt go off. which i believe is my problem but i have no way to disarm it.

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 13, 2009 at 9:24 PM / IP Logged

I have no idea about the Compustar equipment, but some alarms require the door to be open to enter the programming mode. Is there a valet switch that will allow you to disarm the alarm so you can open the door to enter the programming mode?

Back to Top

sik96teg

Member - Posts: 4

Joined: December 17, 2008

Location: New Mexico, United States

Posted: June 13, 2009 at 10:01 PM / IP Logged

thx for the reply i just got it to work now im trying to figure out the wiring for the universal door actuators.

Back to Top

icarus_icarus

Copper - Posts: 229

Joined: November 01, 2005

Location: Ontario, Canada

Posted: June 14, 2009 at 2:27 AM / IP Logged

Reprogamming a new remote I got for my Compustar was finky and a pita, imho. It took 5-6+ tries to get it right...

·Ï¢årµ§·

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar issues

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.