the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2nd gen expedition 2nd batt


Post ReplyPost New Topic
< Prev Topic Next Topic >
mtparker18 
Member - Posts: 27
Member spacespace
Joined: December 16, 2008
Location: Pennsylvania, United States
Posted: June 23, 2009 at 10:08 PM / IP Logged  

Hey guys, I have a second Gen (2003-2006??) Ford Expedition. I am currently running 2 batteries and was wondering where you guys put the second battery or where a good place is to put it. Currently I have a tray made out of MDF board and the battery sits in there and it's mounted to my box. now the box slides everywhere and rips wires out, 2nd gen expedition 2nd batt - Last Post -- posted image..

So can anyone give me any ideas of where to put this battery?

Thanks

spookiestylez 
Silver - Posts: 531
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 23, 2005
Location: Virginia, United States
Posted: June 23, 2009 at 11:28 PM / IP Logged  
Only thing that initially comes to mind is under the rear rollpan. You could essentially mount the second battery wherever you could fit it out of the way.
You could always keep it incorporated onto your box, but mount the enclosure down to keep it from sliding.
Maybe a few pics would help spark some ideas. Maybe someone else who has a expo can help more than me.
Cheers
rtfm
still_walkin 
Silver - Posts: 644
Silver spacespace
Joined: April 18, 2007
Location: California, United States
Posted: June 25, 2009 at 3:02 AM / IP Logged  
I agree post some pics. But a good spot could be by the rear tire wheel wheel. That's a good place to ground it and lower your resistance. Also I would like to add if you have your stock alternator its not going to charge two batteries so look into a high output one. Also when adding battiers and wiring them in parraell I belive one will mess up the other . They must be the same size, charge, age and so forth they have to be completly the same. The reason being is one discharge the other .
1993 sdv
Alpine 4x6 6x9 5 1/4 swr-10d4
alpine v60
12.5 VGA flip down
Nettop pc w/10" touch screen
78nova
5-re audio 5x7 ,10" sub &
Xtx-500.5
"Take the faceplate off get the jumperpack"

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, January 27, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer