pulse horn, lights set up for bike

Thanks,

No jumps. I built that kat for another guy. There are a few more I built and my own kat on my website. www.robwilton.com

Now that I have found you dudes, I am very interested in doing something unique for my own ride. NOt sure what that may be yet but something. I thought a remote start would be cool but since these old dogs are manual choke and not fuel infected its a problem when its cold.

I have been playing around with the idea of using a reverse camera setup with dual screen monitor for my rear mirrors. One cam on each side connected to my signal switch so when I activate the signal the corresponding camera comes on and gives me the view a mirror would.

Also thinking of a motion sensor for blind spot detection. If there is a vehicle in my blind spot an led would light up, but, I am having trouble finding a sensor that has enough range (lets say 15 feet)

IF you check katman1260 on youtube, I have an rfid setup on a katana as well on my channel.

If you don't mind adding a circuit board it would be pretty easy to add a beep and light flash output.  I have a similar circuit already built (do a youtube search for Electronic Beep).

My current system triggers on seperate 12vdv pulses (lock and unlock pulses).  I could easily modify it to trigger the "unlock" on the presence of voltage and the "lock" on the absence of voltage.