viper 1002 e36 needed

Home / the12volt's Install Bay / Car Security and Convenience / viper 1002 e36 needed (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 12, 2009 at 5:18 PM / IP Logged

Set your meter to 20vdc, red lead to 12v+ source, black lead to blue from boot or grey from bonnet, open each in turn, meter should read c.12.4v+ If not look at your diode(s), make sure they are the right way round, if so check back to the BROWN / white boot contact and the bonnet switch, make sure they go to ground when either is opened. My thought is diode wrong way round. Diode(s) should have bands towards switches not alarm.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 1002 e36 needed

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.