2004 pontiac grand prix

hello i bought a 2004 pontiac grand prix it came with a remote starter and alarm well first the remote was not working right so i stoped useing it and i would just look the doors buy useing the one s in side the car now when i do that i use my key to unlock my car and my alarm go s off every time i unlock it and i have a hard time shutting it off just wondering what i should do could some one tell me were i could find where the man computer   for my remote starter could be found and has any one had this problem the model of the remote starter is auto mate 6 any help with this would be great thank s for your time peace grasshoper420

It's hard to understand what you're saying without any puncutation in there, but I think I got the general idea. Automate AM6 is only a remote starter with keyless entry, it's not an alarm. The lower plastic panel on that car, the one that's above your feet....I think it's just three clips you can pry out and the panel comes right off, you might want to look under there with a good light and see if it's an AM6 or something else.

well thank s for the info but i got it it had to be reprogrammed witch i did and now it is working well if dont have an alarm then why dose it go off when i go in to it ? then my manual is wrong then there must be a nother model in my car then because i roll down my window i arm it then i unlock thro the window and then open my door and the alarm go s off beep beep beep what would that be then but any ways i got it working again what i had to do was fine the valet switch push it down five time and on the 5 time push the button's on the remote and then you reprogrammed it oh ya your car has to be on but not started .     peace grasshoper420 ps thank s for the info

Chris Luongo wrote: It's hard to understand what you're saying without any puncutation in there, but I think I got the general idea. Automate AM6 is only a remote starter with keyless entry, it's not an alarm. The lower plastic panel on that car, the one that's above your feet....I think it's just three clips you can pry out and the panel comes right off, you might want to look under there with a good light and see if it's an AM6 or something else.

okay like i said i got it programed but about one hour after it stopped working i did the same steps again and it worked but then again it stopped i think that i meaning me need to get it to save or out of programing dose you no how to do that ?

hello you there

is it the car's horn that goes off or does it sound like a alarm siren?

just the horn

factory alarm? or its a different model and they just tied the siren into the horn instead of mounting a siren.

it is a am6 so just the horn but i was trying to program it and now it say s reduced engine power i think i i messed it up now i dont no what to do it still start s but it says that now reduced engine power

okay i reset it with my obd 2 reader and that when away but still no remote start or unlock i pulled my dash a part and looked at the module or what ever it s called and it is a AM6 so i need to still program it so if any one could help me out that would be great thank s