ungo s100, 2002 pontiac grand am

Home / the12volt's Install Bay / Car Security and Convenience / ungo s100, 2002 pontiac grand am (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

02_grandam

Member - Posts: 27

Joined: September 08, 2009

Location: Newfoundland, Canada

Posted: September 12, 2009 at 12:01 PM / IP Logged

Another idea from my Grand Am forum. I've been posting the same stuff there.

Rainbow1616;1516717 wrote:

Did you measure each wire to ground? When you hit the button on your remote you should have 0 volts to ground.

If you hold one lead on +12 and the other on the blue or green wire you should get 12v when you hit your lock/unlock button. Which wire you have the 12v on depends weather your hitting lock or unlock.

Just tried that. With 12V on one lead, and the other connected to one of the outputs, I got 7.xxV from one wire, with little drop when the button was pressed, and 12.5V (Battery voltage) from the other, with a small drop (12.1V) when the button was pressed.

Pretty sure my outputs are Royally F#ucked.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ungo s100, 2002 pontiac grand am

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.