fiberglass interior

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / fiberglass interior (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

sooverworked

Member - Posts: 16

Joined: September 18, 2009

Location: California, United States

Posted: September 18, 2009 at 9:24 PM / IP Logged

im doing this just for fun and if anyone has ? let me know! hope you enjoy! fiberglass interior -- posted image.

just for fun

sooverworked

Member - Posts: 16

Joined: September 18, 2009

Location: California, United States

Posted: September 18, 2009 at 9:26 PM / IP Logged

this is a 82 el camino by the way! lol

just for fun

sooverworked

Member - Posts: 16

Joined: September 18, 2009

Location: California, United States

Posted: September 18, 2009 at 9:36 PM / IP Logged

fully framed and mounts to the factory mount locations!

just for fun

sooverworked

Member - Posts: 16

Joined: September 18, 2009

Location: California, United States

Posted: September 18, 2009 at 10:55 PM / IP Logged

fiberglass interior -- posted image.

just for fun

ianarian

Copper - Posts: 516

Joined: April 24, 2009

Location: California, United States

Posted: September 20, 2009 at 7:01 AM / IP Logged

Looks like that show overhaulin. Im confused on the last pic, what's goin on there?

This is what I do for FUN!

sooverworked

Member - Posts: 16

Joined: September 18, 2009

Location: California, United States

Posted: September 20, 2009 at 12:17 PM / IP Logged

just showing the fifth sub look real close to the other pic

just for fun

sooverworked

Member - Posts: 16

Joined: September 18, 2009

Location: California, United States

Posted: September 20, 2009 at 1:26 PM / IP Logged

a nice fit

fiberglass interior -- posted image.

1/2 rapped starting to take shape!

fiberglass interior -- posted image.

just for fun

sooverworked

Member - Posts: 16

Joined: September 18, 2009

Location: California, United States

Posted: September 23, 2009 at 10:00 PM / IP Logged

fiberglass interior -- posted image.

fully rapped except the top got to pull the windshield next (FUN FUN)

just for fun

d_rock_81

Member - Posts: 39

Joined: June 09, 2009

Location: North Dakota, United States

Posted: September 24, 2009 at 12:45 AM / IP Logged

5 subs in an elcamino...wow.....thats the going to be the cadillac of the trailer park....j/k :-)

Dustin Rockney

Rockstar Autosports

squires500

Member - Posts: 47

Joined: June 21, 2008

Location: Australia

Posted: October 27, 2009 at 7:21 AM / IP Logged

hey just wondering how you cut such perfect small circles, i know the obvious one is a holesaw, im just wondering cause im building some jag door cars and they are keeping parts from the original door speaker grill and rings i can incorporate them if i can cut the circles well enough but at the moment i can figure out how to cut small circles to any size perfectly as the speaker rings are like 13.5mm and 6.7mm in diameter i cant use a holesaw and i dont have a routertable so im out of ideas

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.