viper 5701, error, pairing instructions?

Home / the12volt's Install Bay / Car Security and Convenience / viper 5701, error, pairing instructions? (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

rutcgr18

Member - Posts: 45

Joined: May 26, 2005

Location: United States

Posted: September 24, 2009 at 9:28 PM / IP Logged

Got a new 2 way remote. Prgramed it. Seem to work fine. Now i hit the lock or unlock button and it unlocks and locks but also gives me a error sound. I have del the remote from the unit i need to add it again and see if that fixes it. Who has the pariing instuctions?. THoughts on the other problem??

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: September 25, 2009 at 9:44 AM / IP Logged

unplug the 12? pin harness that powers the brain for a minute or so and plug it back in.... these units had issues with the out-of-range notification circuit, that was remedied by "rebooting" the brain.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

rutcgr18

Member - Posts: 45

Joined: May 26, 2005

Location: United States

Posted: September 25, 2009 at 10:33 AM / IP Logged

thanks does any one have the steps to add a remote??

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: September 25, 2009 at 2:07 PM / IP Logged

i uploaded the programming guide

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

rutcgr18

Member - Posts: 45

Joined: May 26, 2005

Location: United States

Posted: September 26, 2009 at 7:46 PM / IP Logged

kgerry wrote:

i uploaded the programming guide

Thanks

I have add the remote still having problem. I have unplugged my brain for 3 hours and it is still doing it. Is there a firmware upgrade for these things. It really anyoing. I am thinking about just buying a new system. Not happy with DEI on this one.

rutcgr18

Member - Posts: 45

Joined: May 26, 2005

Location: United States

Posted: September 26, 2009 at 7:55 PM / IP Logged

I found this info any one have any incite on this??

Directed will be shipping out new brians in the next few months with a firmware update that resolves this issue completely. Depending on where it was purchased, I would believe most retailers will do a swap for you when those are shipped and become available. In the meantime there is a fix. Place a 10,000 ohm resistor in series with the blue wire on the antenna lead as close to the brain as possible. Hope this helps!

source: http://www.fixya.com/support/t1617053-viper_5701_remote_tofix

rutcgr18

Member - Posts: 45

Joined: May 26, 2005

Location: United States

Posted: September 29, 2009 at 4:50 PM / IP Logged

Bump no one can help on this one. Can i update the firmware on this thing?

Thanks

mike

xtremej

Gold - Posts: 1,440

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 24, 2006

Location: United States

Posted: September 29, 2009 at 4:55 PM / IP Logged

no you cannot, just add the 10k ohm resistor to the antenna lead as described.

rutcgr18

Member - Posts: 45

Joined: May 26, 2005

Location: United States

Posted: September 29, 2009 at 5:15 PM / IP Logged

xtremej wrote:

no you cannot, just add the 10k ohm resistor to the antenna lead as described.

what does that acutally do?

vipersport328

Member - Posts: 8

Joined: December 28, 2009

Location: Illinois, United States

Posted: January 18, 2010 at 8:37 PM / IP Logged

I have the same problem with my 5701 two way remote. Unplugged the brain and still have the same problem. Has anyone added the 10k ohm resistor in series? Just seeing if that works. Thanks

Pete

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.