viper 5701, error, pairing instructions?

Home / the12volt's Install Bay / Car Security and Convenience / viper 5701, error, pairing instructions? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

yimke

Copper - Posts: 417

Joined: June 23, 2009

Location: Nebraska, United States

Posted: January 19, 2010 at 10:08 AM / IP Logged

Are you using any D2D device? If so, manually wire in your lock/unlock via the harness to your 3 pin on the brain. Then snip the red and white wires on the D2D cable. If that works then it was D2D.

Back to Top

vipersport328

Member - Posts: 8

Joined: December 28, 2009

Location: Illinois, United States

Posted: January 19, 2010 at 12:14 PM / IP Logged

I am using an XK01 but I did not use the D2D cable I manually connected all the wires.

Thanks

Pete

Back to Top

jeremytravis

Copper - Posts: 62

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 17, 2009

Location: California, United States

Posted: January 19, 2010 at 8:32 PM / IP Logged

Have you tried replacing the battery in the remote, or checked the antenna cable and connections, sometimes the wires at the harness that plugs into the antenna get pinched.

**advanced mecp certified

Back to Top

vipersport328

Member - Posts: 8

Joined: December 28, 2009

Location: Illinois, United States

Posted: January 20, 2010 at 4:01 AM / IP Logged

I have replaced the batteries no help. I will check the antenna wires to see if they are pinched. What about putting the 10kohm resistor does that work.

Thanks

Pete

Back to Top

ashleytingle

Member - Posts: 3

Joined: August 21, 2010

Location: South Carolina, United States

Posted: September 06, 2010 at 7:59 PM / IP Logged

I am having the exact same problem. Has anyone tried the resistor fix????

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5701, error, pairing instructions?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.