viper 5901 into 1987 toyota mr2

I didn't doubt you.  It just wasn't where either of us thought it would be (no 8 pin connector) and took me a while to find.  I guess this is a new version of the 5901.

Cheers,

Thanks to everyone!  Especially you t&t tech, you have been most helpfull.  I know have all the information and most of the parts I need to install this alarm.  I still need four relays:  trunk release, rear defogger, dome light supervision and parking lights flash (per the backup battery's instructions it can only supply power to the brain) and two more pins (one for the rear trunk and one for the front trunk).  I am also waiting on a plug I ordered for the optional sensor port.  I have time off between Christmas and New Year's so I will be installing then.  I am planning for a three to four day install.  I will be removing the entire dash and most of the interior for this.  My current thought is to mount the unit up behind the heater on the passenger side of the car.  I can then run most of the wires through the upper part of the dash.  I figure this would make it the most difficult to get at.  If someone has a better idea I am open to suggestions.

I will be installing:

I've always enjoyed installing stereos and gauges in cars.  It may seem silly, but I'm excited to do this!

Thanks again for all your help!

Cheers,