alarm/remote start wiring

Home / the12volt's Install Bay / Car Security and Convenience / alarm/remote start wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: December 14, 2009 at 7:52 PM / IP Logged

Start your own thread! You probably didn't power an ignition or accessory wire

commit your way to jehovah and he will act in your behalf. psalms 37:5

Back to Top

Bushytea

Member - Posts: 18

Joined: October 24, 2004

Location: United States

Posted: December 15, 2009 at 1:20 PM / IP Logged

Here is what I have on the door locks now.

On the plug for the switch I have a pink / YELLOW wire that show power only when pushed to lock. A pink/lt green wire that has power only when pushed to unlock. Then I have a black wire for ground, a GREEN/ YELLOW wire that has constant power along with the illumination wire(which most say don't count).

So from what the information states here this would be a positive lock system?

Thanks!

Back to Top

Bushytea

Member - Posts: 18

Joined: October 24, 2004

Location: United States

Posted: December 15, 2009 at 1:55 PM / IP Logged

Well, it could be the 5 wire as you stated before and the previous wiring information I found could be wrong.

The 5 wire does not mean there are exactly 5 wires but that there could be 4 or 6 wires instead of 5. Well not counting the illumination I have 4 wires then. One constant power, one ground, lock wire and unlock wire.

Thanks!

Back to Top

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: December 15, 2009 at 5:06 PM / IP Logged

You could just give the suspected wire a 12v pulse and see if it unlocks...I'm thinking it is the output on the unit as opposed to having to 5 wire that car...I have a 98 Grand Marquis...Been awhile...But it has the pad on the door and the wires were just a + trigger...Maybe you could wire up a relay for + pulse and see if that works...I dont think we ever got the model # of the unit...Re-read the door lock wiring description in the install manual...

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm/remote start wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.