for those with 08+ accords

elranchero, don't panic, I work for myself, I'm 63 and I'm still learning because if I don't I won't get any work. Look to top of page, "rookies seeking advice" for some info. Look at the posts, look at the problems, most of them are recurring ones, if you like me still prefer a test light, don't worry, save the DMM for data systems, lets face it we don't need to know what a CAN system does, just which wires to pick up. I'm sure you're fully conversant with the "art " of soldering, use Scotch 33 + for solder joints and heat shrink tubing rather than butt connectors. The rest is no more than having patience and determination, a good memory, knowledge of circuitry, relays and diodes and determination.

well here are the pictures i promised i would post. as mentioned, i went into the doors only because i want to roll up/down the windows. it was NOT for disarm/locks

picture of entire door. what you want to focus on is the white plug to the far left.

a more focused picture of the white round plug for disarm, lock, unlockpicture of the actaul plug and the 3 wired needed. Diode isolate white and brown and set for double pulse for unlockPinout:

BROWN - disarm single pulse

WHITE - diode isolate with brown and double pulse to unlockORANGE - lockTed

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

if you extend the pulse for orange, it will roll up the windows, if you extend pulse for brown, it will roll down the windows.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert