2004 jeep liberty remote start problem

Home / the12volt's Install Bay / Car Security and Convenience / 2004 jeep liberty remote start problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: January 10, 2010 at 9:13 PM / IP Logged

for parklights it is either at the BCM or the light switch harness

if you get it at the BCM its in a grey 22 pin plug, pin #5, and the color is lt. GREEN/ orange

if you get it at the light switch harness it is the same color

trunk release wire is ORANGE / pink and it is also at the BCM, grey 26 pin plug, pin #17

Back to Top

snowmancts

Member - Posts: 1

Joined: October 25, 2010

Location: Tennessee, United States

Posted: October 25, 2010 at 7:44 PM / IP Logged

here is my problem. I am following all of these instructions that everyone is posting, but I have a autopage c3-rs-625 remote start. I have all the wires hooked up that I thought were necessary. I wasn't worried about the locks was going to keep the factory control. So I hooked up all the ignition wires, starter, blower, parking lights, horn, and brake. I have went through the programming part. I get the lights to flash the horn to blow, and the led to blink, but cant even get the truck to try to start. It doesn't even turn on. My question is do I have to have the factory alarm disarm hooked up? Is there anything else that I need hooked up that I am not. I have the hood pin grounded not hooked up is that wrong.

Vermilyer Custom Audio

www.vermilyercustomaudio.com

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 25, 2010 at 8:15 PM / IP Logged

Why do you have the hood pin wire grounded? If it's grounded then it will not start.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 jeep liberty remote start problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.