2010 toyota rav4

Home / the12volt's Install Bay / Car Security and Convenience / 2010 toyota rav4 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

pitoaudiovisual

Copper - Posts: 388

Joined: April 25, 2005

Location: Pennsylvania, United States

Posted: January 06, 2010 at 10:42 PM / IP Logged

Can anyone please give me the paper work for a 2010 Toyota Rav4. Thank u in advance.

Confidence is the key to any project!!

Search for other posts by pitoaudiovisual

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: January 07, 2010 at 6:36 AM / IP Logged

Wire/Function Colour Location/Description Polarity

12 VOLTS Blue Ignition switch harness +

IGNITION White Ignition switch harness +

IGNITION 2 Pink Ignition switch harness +

ACCESSORY Red Ignition switch harness +

STARTER White Ignition switch harness +

STARTER 2 Yellow Ignition switch harness +

KEY SENSE Blue Ignition switch harness -

TACH SIGNAL Gray Diagnostic plug below dash on driver's side AC

LOCK Pink On white plug in driver's kickpanel -

UNLOCK Blue (double pulse) On white plug in driver's kickpanel -

DOORPIN White 6-pin plug on fusebox -

TRUNK PIN Lt.green On 30-pin plug on top of fusebox -

FACTORY ARM Arms with lock

FACTORY DISARM Disarms with unlock

BRAKESWITCH Blue At switch or 30-pin plug on top of fusebox +

PARKLIGHTS Green On 30-pin plug on top of fusebox +

HAND BRAKE Black On 14-pin plug on top of fusebox -

HORN Lt.green At steering column -

HEADLIGHTS Blue At light switch harness -

REVERSE LIGHTS Red On 30-pin plug on top of fusebox +

VSS WIRE Violet On back of radio AC

Mike M2

Tech Manager

CS Dealer Services

pitoaudiovisual

Copper - Posts: 388

Joined: April 25, 2005

Location: Pennsylvania, United States

Posted: January 07, 2010 at 6:31 PM / IP Logged

Does it need a bypass and if so will a 556U work

Confidence is the key to any project!!

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 07, 2010 at 8:06 PM / IP Logged

It will require a bypass. A 556u will work, but you will end up loosing a key. I suggest you use a databypass where no key will be hidden. Everyone has their own opinion on bypasses. I prefer using Fortin pieces. The Key-Override-All would work, but since your in the states, picking up a bypasskits or idatalink modules would be cheaper. Good luck

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: January 07, 2010 at 8:42 PM / IP Logged

Use Idatalink and the factory remotes will still work when you remote start it.

Mike M2

Tech Manager

CS Dealer Services

jjcobm

Member - Posts: 3

Joined: January 04, 2010

Location: Minnesota, United States

Posted: January 08, 2010 at 10:27 PM / IP Logged

Thank you for the Idatalink, I have a 08 and this looks like it makes installing an alarm much easier.

beam08

Member - Posts: 45

Joined: July 25, 2009

Location: California, United States

Posted: January 09, 2010 at 3:04 PM / IP Logged

thanks alots

shaip99

Copper - Posts: 112

Joined: May 04, 2005

Location: Canada

Posted: January 13, 2010 at 12:49 AM / IP Logged

Mike M2 wrote:

Use Idatalink and the factory remotes will still work when you remote start it.

what does the bypass have to do with the remotes working? its the vehicle that locks out the remotes when the ignition is on how would a bypass make any difference

"Computer games don't affect kids, I mean if Pac Man affected us as kids, we'd

all run around in a darkened room munching pills and listening to repetitive

music."-Kristian Wilson, Nintendo Inc.

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 13, 2010 at 6:31 AM / IP Logged

idatalink has a firmware for their modules where it allows the factory fobs to work while the ignition is still on for toyotas

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

pitoaudiovisual

Copper - Posts: 388

Joined: April 25, 2005

Location: Pennsylvania, United States

Posted: February 22, 2010 at 4:46 PM / IP Logged

I bought a APS 57N to install in to this 2010 Rav 4 and noticed that to unlock u need a double pulse and the remote start doesnt have a second unlock feature is there anyway of going around it. Thanks in advance

Confidence is the key to any project!!

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.