05 dodge magnum, viper 350

Home / the12volt's Install Bay / Car Security and Convenience / 05 dodge magnum, viper 350 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

sriguez

Member - Posts: 5

Joined: March 19, 2010

Location: Virginia, United States

Posted: March 19, 2010 at 7:48 PM / IP Logged

Hello im installing a viper 350 plus into a 05 dodge magnum and im trying to find the door trigger wires and also the door lock is a one wire system do i need resistor or relays for this application sriguez@cavtel.net

Riguez

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 19, 2010 at 8:26 PM / IP Logged

you need 2 relays and 2 resistors

PURPLE / dark green

lock - 100ohm

unlock - 330ohm

LF Latch	PURPLE	(-)	DRIVERS KICK OR INSTRUMENT CLUSTER
RF Latch	PURPLE / WHITE	(-)	DRIVERS KICK OR INSTRUMENT CLUSTER
LR Latch	PURPLE / GRAY	(-)	DRIVERS KICK OR INSTRUMENT CLUSTER
RR Latch	PURPLE / YELLOW	(-)	DRIVERS KICK OR INSTRUMENT CLUSTER
Trunk Trigger	PURPLE / ORANGE	(-)	PASSENGER KICK OR INSTRUMENT CLUSTER

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

sriguez

Member - Posts: 5

Joined: March 19, 2010

Location: Virginia, United States

Posted: March 19, 2010 at 8:40 PM / IP Logged

Thank,You for replying so fast

Riguez

jeremytravis

Copper - Posts: 62

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 17, 2009

Location: California, United States

Posted: March 19, 2010 at 10:21 PM / IP Logged

Isn't it ,

PURPLE / dk.green

Lock_ -330ohm

Unlock_-100ohm

& don't forget to diode isolate all four door trigger wires.

**advanced mecp certified

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: March 20, 2010 at 12:12 AM / IP Logged

jeremytravis wrote:

Isn't it ,

PURPLE / dk.green

Lock_ -330ohm

Unlock_-100ohm

& don't forget to diode isolate all four door trigger wires.

yes:

POWER LOCK PURPLE / DARK GREEN (1-Wire Door Lock System) See NOTE *3 IN DRIVERS KICK PANEL

POWER UNLOCK Same wire

NOTE *3 this vehicle uses a 1-Wire Door Locking System, LOCK requires a (-)Negative thru a 330 Ohm Resistor and UNLOCK requires a (-)Negative thru a 100 Ohm Resistor

sriguez

Member - Posts: 5

Joined: March 19, 2010

Location: Virginia, United States

Posted: March 21, 2010 at 5:17 PM / IP Logged

does anyone have the diagram for the door lock relays and is it a regular 30 amp 5 pin relay

Riguez

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 21, 2010 at 7:47 PM / IP Logged

a 30/40 amp spdt will be fine.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

sriguez

Member - Posts: 5

Joined: March 19, 2010

Location: Virginia, United States

Posted: April 10, 2010 at 4:15 PM / IP Logged

Hello

does anyone have the door lock wiring and info for a 98 Chrysler cirrus its a one wire setup

Riguez

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: April 11, 2010 at 11:43 PM / IP Logged

98 Cirrus locks:

WHITE/ green (+) single wire...lock thru 620 ohm....unlock thru 2.7K ohm

sriguez

Member - Posts: 5

Joined: March 19, 2010

Location: Virginia, United States

Posted: April 14, 2010 at 7:24 PM / IP Logged

hello i have it hooked up with two relays and the two resistors

and it is not working and it is wired to the WHITE/ green wire coming from the 20 pin connector behind the fuse panel is this correct? also which wire is the trunk trigger Thanx for any assistance.

Riguez

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.