python 991 problems

Home / the12volt's Install Bay / Car Security and Convenience / python 991 problems (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

toffe

Member - Posts: 6

Joined: April 02, 2010

Posted: April 19, 2010 at 8:48 AM / IP Logged

I've got a multimeter, i'm currently an electrician and ICT operator. So meters i've got enough of. VM i dont understand what you mean about. Vibration Meter was all i found when googlinG VM. Hehe

But i've connected a 12v to the red and 0v to a battery and i've metered 12v troughout the fuse on the wire. Also i've ohmed 0ohm between the ground pin and the chassis ground.

So it's creapy that the control center dident blink a secound. I've not tried to "sync" the remotes to the unit. Maby thats why it dosent blink because it's not synced to any remotes?

Thank you for the effort of helping me :) I appreciate it alot ! :)

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: April 19, 2010 at 7:51 PM / IP Logged

i noticed that on the python units when you connect them, they dont click or anything. proceed to programming, and if a function on the remote is pressed, if the unit responds with clicks, you know its still ok.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

python 991 problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.