factory locks disarm aftermarket alarm

I know this has been asked before but here goes again.  Does anybody have good experience with a remote start security combo that has inputs to disarm the aftermarket alarm?  I am looking at a ford which has the keyless entry pad on the driver door and well, you get what I'm going for.  There is no factory alarm  on this jalopy so I prefer to have something.  I'm most familiar with dei products but they have jack squat in this dept.  If you got an ace up your sleeve give me a model number and manufacturer so I can locate it.  Thank YouAdvanced

Omega R&D have a number of systems that provide this feature Excalibur AL-1610EDP, AL-1620EDP, AL-1810EDP, AL-1820EDP, AL-1920EDP Crime Guard 810i6, 830i6This information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

If you like DEI stuff. Get an Automate AM1. Its a factory keyless entry upgrade and is cake to install. I've done about 20 of them.

the AM1 does not have remote startThis information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

My understanding is that Avox is coming out with a RS/alarm upgrade...Mike M2

Tech Manager

CS Dealer Services

if you like dei you can use a AM1 and an add on remote start (avital 4100 i think thats the model number i forget ) to your factory key pad you can use them both together with no problems

thanks for all of the replies.  I am  going to go with one of the omega products 91stt listed.  I would like to find one that accepts the blade module for less modules chilling in the car. Advanced

Here's a silly question, if a blade module is branded with, say compustar, will it still be compatible with the omega?  I have used idatalink bypasses just not the blade.Advanced

Omega are coming out with Blade compatible models but I do not believe they are shipping yet, I'll need to check with my distributor. These are the combo units Excalibur AL-1630EDPB, AL-1830EDPB, AL-2030EDPB edit: the 30 series I listed here can use both ADS/idatalink and Trilogix (DEI) protocols on the dataport.This information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

I hate to ruin your great idea, but if you have an alarm that has a disarm input and tie it to factory unlock and someone breaks into the vehicle...doesn't that mean if they press the unlock button on the inside, it will disarm the alarm as well? Just a thought.Brent

MECP Advanced Installer

"I don't claim to know it all, just more than you."