the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5901


Post ReplyPost New Topic
< Prev Topic Next Topic >
mnfx4 
Member - Posts: 1
Member spacespace
Joined: November 26, 2010
Location: Minnesota, United States
Posted: December 04, 2010 at 7:14 PM / IP Logged  

I'm installing a Viper 5901 in 2010 F150 with a PKALL. I believe I have everything wired up correctly. I can unlock and lock the doors with the remote but wanted to test the remote start without programing the PKALL and put the key in and turn it to IGNITION the alarm sounds and I cant disarm it with the remote. These are the connections I have made made so far. Thanks in advance.

H1/1: Trunk Output - N/A

H1/2: +12v Constant - (PUR/RED at Ignition Harness)
H1/3: Siren
H1/4: Park Light Iso - N/A
H1/5: GND
H1/6: (+)Door Trigger - N/A
H1/7: Trunk Pin - N/A
H1/8: (-)Door Trigger (Diodes on the 4 doorpin wires in SmartBoxJunction)
H1/9: Dome Light - N/A
H1/10: Turbo Timer - N/A
H1/11: Park Light Output - (PUR/WHT at SBJ)
H1/12: GND Armed - N/A

H3/1: IGN 1 (WHT/ORG at Ignition Harness)

H3/2: Flex Input - N/A
H3/3: ACC (PUR/GRN at Ignition Harness)
H3/4: Starter Out (BLU/WHT at Ignition Harness)
H3/5: Starter In - N/A
H3/6: IGN 1 Input (PUR/RED at Ignition Harness)
H3/7: Flex Out - N/A
H3/8: Flex In - N/A
H3/9: ACC/START Input - (PUR/RED at Ignition Harness)

H2/8: Horn Output (BLU/WHT at Steering Harness)

H2/10: Status Out (PKALL (-) while running)
H2/11: Hoodpin (Hoodpin (GND when opened)
H2/17: Brake Input (PUR/WHT at Brake Harness)
H2/18: Neutral Safety (GND)

Door Lock1: Unlock Out (PUR/GRAY at SBJ)

Door Lock3: Lock Out (GRAY/YEL at SBJ)

Nuffstylez 
Copper - Posts: 58
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: August 21, 2003
Location: United States
Posted: December 05, 2010 at 8:32 PM / IP Logged  
Hey, I just started out learning about alarms, but I think with the H3 harness, the H3/4 started out wire has to be the car side of the starter kill wire and the H3/5 wire has to be the key side of the starter kill wire.  So you cut the blue/white wire and connect the car side of the wire to H3/4 and the other side to H3/5.  Like I said, Im new to this so take another look at this.  That's all I can help with.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer