domelight

Home / the12volt's Install Bay / Car Security and Convenience / domelight (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Malibu2882

Member - Posts: 13

Joined: April 21, 2003

Location: United States

Posted: April 21, 2003 at 2:54 AM / IP Logged

I need help. I had a GM factory alarm installed but Domelight suppervision was an option(needs relay) Well I wired up the relay and tapped the wires.But the domelight will not come on when the alarm is disarmed. I can hear the relay time out after I disarm (30sec). I have negitive door switches. I wired it up just like the guide said. 87-negative 85 12v fused 30 negitive door trigger, 86 alarm oillumated output, 87a none. I used the wires coming out of the main unit, could this be it? I don't know what I'm doing wrong. Please help! Thanks!

Dave

Back to Top

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: April 21, 2003 at 5:16 AM / IP Logged

is pin 86 a neg output??

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Back to Top

Malibu2882

Member - Posts: 13

Joined: April 21, 2003

Location: United States

Posted: April 22, 2003 at 1:33 AM / IP Logged

Yes, pin 86 is neg. 200mA illumated output

Dave

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

domelight

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.