2006 lexus is350 remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2006 lexus is350 remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

dasbogie

Silver - Posts: 514

Joined: September 30, 2006

Location: Pennsylvania, United States

Posted: January 10, 2011 at 7:37 PM / IP Logged

Just did an 07 is250 with flcan and factory fobs did not work when car is running. Had to go in the door for doorlocks/factory alarm control. Where is the best place to get parking lights in this jalopy, we ran a wire all the way over to pass. fuse box to trigger negative parking lights.

Advanced

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 11, 2011 at 8:02 AM / IP Logged

there are 2 wires

both are available on driver side.

Parking light (+) BROWN @ driver fuse box grey 30pin plug, pin 24

parking light (-) YELLOW @ driver fuse box 28pin plug pin 5 Notes: The plug is on the side of the fuse box facing the firewall.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

taclasm

Member - Posts: 9

Joined: December 03, 2010

Location: Hawaii, United States

Posted: January 19, 2011 at 2:49 AM / IP Logged

Can idatalink work with DEI D2D wiring?

Back to Top

taclasm

Member - Posts: 9

Joined: December 03, 2010

Location: Hawaii, United States

Posted: January 20, 2011 at 11:26 PM / IP Logged

Looking at the installation manual of the Viper 5101, do i need diodes to wire the power locks? It look like lock trigger and unlock trigger wire can be connected to either + or -. Installing this on a Lexus IS350. Thanks.

Back to Top

taclasm

Member - Posts: 9

Joined: December 03, 2010

Location: Hawaii, United States

Posted: February 21, 2011 at 1:09 AM / IP Logged

I just got done installing the python 580 and pkall. I just want to thank you guys for helping out. Programming the bypass was a breeze. All I can say is remote start are easy to install as long as you have the time and knowledge of the cars' electrical.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 lexus is350 remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.