viper 5901, 2004 ford ranger

Home / the12volt's Install Bay / Car Security and Convenience / viper 5901, 2004 ford ranger (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: February 04, 2011 at 9:18 PM / IP Logged

Yes, that is the connector. To verify, download the ADS TB FM Install guide, ##4738##, from the

iDatalink WEB site, http://www.idatalink.com/helpdesk/ . Page 7 has a diagram of the connectors.

Soldering is fun!

Back to Top

chaddaddy

Copper - Posts: 55

Joined: January 21, 2011

Posted: February 05, 2011 at 8:36 AM / IP Logged

Ok cool thanks got that working. Question though, does anyone know where i can get a pair of decent power door locks that aren't going to cost me $200?

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 05, 2011 at 11:20 AM / IP Logged

Try Googling Spal, Radio Shack, MES, DEI all the major alarm manufacturers, $200? Nearer $20.

Back to Top

chaddaddy

Copper - Posts: 55

Joined: January 21, 2011

Posted: February 07, 2011 at 8:24 AM / IP Logged

Ok so everything is done. The only thing that is giving me trouble s the DEI 1100F bypass.I do the programming as ordered but after the 1st step the LED goes red for like 1/32 of a second and then goes green solid for 2 seconds and it does nothing after that. I reset and did remote start again and it worked, once, then i shut RS off and tried agin, no go the security anti theft light was blinking on the dash....? any ideas?

Back to Top

chaddaddy

Copper - Posts: 55

Joined: January 21, 2011

Posted: February 07, 2011 at 5:58 PM / IP Logged

Ok never mind I got it. I tried it one more time and it worked. Everything is great I just have to isolate the doors and its done. :)

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5901, 2004 ford ranger

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.