remote starter crank but not starting

Primary harness (H1), 12-pin connector H1/1 RED / WHITE (-) 200mA TRUNK RELEASE OUTPUT H1/2 RED (+)12v CONSTANT INPUT H1/3 BROWN (-) HORN OUTPUT H1/4 WHITE/ BROWN LIGHT FLASH ISOLATION WIRE - PIN 87a of onboard relay H1/5 BLACK (-) CHASSIS GROUND H1/6 VIOLET (+) DOOR TRIGGER INPUT* H1/7 BLUE (-) FACTORY HORN INPUT H1/8 GREEN (-) DOOR TRIGGER INPUT* H1/9 BLACK/ WHITE (-) 200mA DOME LIGHT OUTPUT H1/10 WHITE/ BLUE (-) REMOTE START/ TURBO TIMER ACTIVATION INPUT H1/11 WHITE PARKING LIGHT OUTPUT H1/12 ORANGE (-) 500mA GROUND WHEN ARMED OUTPUT --------------------- Auxiliary harness (H2), 7-pin connector H2/1 LIGHT GREEN/ BLACK (-) 200mA FACTORY ALARM DISARM OUTPUT H2/2 LIGHT GREEN / WHITE (-) 200mA FACTORY ALARM ARM OUTPUT H2/3 WHITE/ VIOLET (-) 200mA AUX 1 OUTPUT H2/4 VIOLET/BLACK (-) 200mA AUX 2 OUTPUT H2/5 WHITE/ BLACK (-) 200mA AUX 3 OUTPUT H2/6 LIGHT BLUE (-) 200mA 2ND UNLOCK OUTPUT H2/7 GRAY/BLACK (-) DIESEL WAIT TO START INPUT ---------------------------- Heavy gauge remote start, (H3) 8-pin connector H3/1 PINK IGNITION 1 INPUT/OUTPUT H3/2 RED / WHITE (+) FUSED (30A) IGNITION 2 / FLEX RELAY INPUT 87 H3/3 ORANGE ACCESSORY OUTPUT H3/4 VIOLET STARTER OUTPUT H3/5 RED (+) FUSED (30A) IGNITION 1 INPUT H3/6 PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT 30 H3/7 PINK/BLACK FLEX RELAY INPUT 87A key side (if required) of FLEX RELAY H3/8 RED / BLACK (+) FUSED (30A) ACCESSORY/STARTER INPUT ----------------------------- Remote start input, 5-pin connector 1 BLACK/ WHITE (-) NEUTRAL SAFETY SWITCH INPUT 2 VIOLET/WHITE TACHOMETER INPUT 3 BROWN (+) BRAKE SHUTDOWN INPUT 4 GRAY N/O or N/C (-) HOOD PIN SWITCH INPUT 5 BLUE/WHITE (-) 200 mA 2ND STATUS/REAR DEFOGGER OUTPUT Remote start auxiliary output, 5-pin 1 PINK/WHITE (-) 200mA FLEX RELAY CONTROL OUTPUT 2 ORANGE (-) 200mA ACCESSORY OUTPUT 3 VIOLET (-) 200mA STARTER OUTPUT 4 PINK (-) 200mA IGNITION 1 OUTPUT 5 BLUE (-) 200mA STATUS OUTPUT what of these wires should i connect to my car?

hi

anyone can help?