5902 on manual integra

Home / the12volt's Install Bay / Car Security and Convenience / 5902 on manual integra (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

00-gsr

Member - Posts: 9

Joined: April 24, 2011

Location: Florida, United States

Posted: April 24, 2011 at 9:29 PM / IP Logged

so just get that bypass module and wire it the same as in the picture and thats it right

syl20rochon

Copper - Posts: 298

Joined: October 16, 2009

Location: Ontario, Canada

Posted: April 24, 2011 at 9:32 PM / IP Logged

You will be on the right track

Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

00-gsr

Member - Posts: 9

Joined: April 24, 2011

Location: Florida, United States

Posted: April 24, 2011 at 9:33 PM / IP Logged

once i order that module bypass is it plug and play or would i have to wire it

syl20rochon

Copper - Posts: 298

Joined: October 16, 2009

Location: Ontario, Canada

Posted: April 24, 2011 at 9:34 PM / IP Logged

a few wires to connect, not that much. I will guide you through it.

Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

syl20rochon

Copper - Posts: 298

Joined: October 16, 2009

Location: Ontario, Canada

Posted: April 24, 2011 at 9:41 PM / IP Logged

Quick question? Do you have a spare valet key? I believe that the color is grey. Before you order the bypass, are you willing to try something out?

Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

00-gsr

Member - Posts: 9

Joined: April 24, 2011

Location: Florida, United States

Posted: April 24, 2011 at 9:44 PM / IP Logged

i just recently bought the car and it only came with one key

syl20rochon

Copper - Posts: 298

Joined: October 16, 2009

Location: Ontario, Canada

Posted: April 24, 2011 at 9:47 PM / IP Logged

ok then, get the bypass

Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

00-gsr

Member - Posts: 9

Joined: April 24, 2011

Location: Florida, United States

Posted: April 24, 2011 at 9:50 PM / IP Logged

ok thanks for all your help

syl20rochon

Copper - Posts: 298

Joined: October 16, 2009

Location: Ontario, Canada

Posted: April 24, 2011 at 9:59 PM / IP Logged

No problem..

Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: April 25, 2011 at 5:14 AM / IP Logged

Some additional info on the iDatalink bypass module. The ADS TB module will need to be flashed with the correct

firmware ( ADS TB HA1 ) prior to use. This requires a special USB cable ($60). If you don't have the cable,

make sure the place that sells the module will flash it for you with the correct firmware.

Another option is to use he ADS TBSL HA bypass module. This "Solo Series" module comes preloaded with the

correct firmware and is ready to go right out of the box. Either module is a great choice and the wiring and

programming are the same.

Here is a link to the iDatalink site for more info : http://www.idatalink.com/support/helpdesk Just look up

your car and download the corresponding install guide.

Soldering is fun!

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.