the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

5902 on manual integra


Post ReplyPost New Topic
< Prev Topic Next Topic >
syl20rochon 
Copper - Posts: 298
Copper spacespace
Joined: October 16, 2009
Location: Ontario, Canada
Posted: April 25, 2011 at 6:17 AM / IP Logged  
You're right, but I believe that all ADS modules are flashed with the KO firmware which is universal to all makes. You just have to print the manual and choose the correct type. But for sure, you need to check that before buying or get the solo unit.
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.
Krazzyborri 
Copper - Posts: 56
Copper spacespace
Joined: October 11, 2003
Location: United States
Posted: June 30, 2011 at 12:30 AM / IP Logged  
syl20rochon… Great pics!! And thanks for the support… I did a manual Teg 5+ years ago and remember bypassing the clutch at the harness under the hood near the firewall. I’m setting up to do one on a 1997 integra LS and had a question about the bypass… I see in your pics that you show the clutch bypass being the BLACK/ red wire at the left kick panel.
I’m assuming that you need to cut the BLACK/ red wire and connect it to the violet and green wires from the DEI H3 connector. Is that correct?? And if that is correct can we assume that the BLACK/ white wire in the steering column remains untouched?
Thanks!!
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, January 22, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer