the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 charger headlights


Post ReplyPost New Topic
< Prev Topic Next Topic >
mr. b 
Member - Posts: 14
Member spacespace
Joined: June 03, 2011
Posted: June 09, 2011 at 10:11 PM / IP Logged  

btw the y/b wire reads lower when the alarm is triggered and higher when the carfinder button is pressed

that might be the problem

mr. b 
Member - Posts: 14
Member spacespace
Joined: June 03, 2011
Posted: June 13, 2011 at 7:32 PM / IP Logged  

the headlight output while the drl,toggle headlights, or car finder mode is .5v

while the output for the alarmtriggeRED / panic mode is .1v

the drl/toggle/car finder work, but not the panic/triggered alarm

Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, April 14, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer