2011 corolla le, immobilizer wiring

Having trouble programming a new key overideall bypass from fortin in this 2011 corolla le. It has the 80bit "g" key and imo connections under the hood. Remote works ok ( tried with key in ignition) however module wont program.Any suggestions https://ifar.ca/en/download/2327/preview.html

What firmware version is written on the module? Has to be 4.00 or higher. What does the LED on the module do when you try to program? Also, you have to start the car and let it run to program the module. Just turning the key to ignition won't do it.

Version 4.01 module . I held program button in while plugging connector 2 first then connector 3 on the back and finally connector 1 -power .When led came on released button- light stays on Insert key and turn ignition on Start car and wait Red light stays on solid -no flashes

Here is some info on the PKALL that might help :

https://ifar.ca/en/support/products/55-key-override-all_programming_diagnostics.html

Soldering is fun!

This is a stupid question but do you have 12vdc on the red wire. I am not familiar with this unit, but I know on DEI's unit the red button will light up just like this but will not program if you do not have 12vdc on the red wire. Just had this issue with a DEI DB-ALL two days ago. Thought i had power but didnt and it wouldnt program just like Fortin is with you. Just a thought.