the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5901

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / viper 5901 (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
valentin1234 
Member - Posts: 5
Member spacespace
Joined: December 15, 2011
Location: Texas, United States
Posted: December 15, 2011 at 7:08 AM / IP Logged  
need help connecting ignition 2 on a 99 f150 im using a viper 5901 do i use a relay to connect if so can i get a diagram
valentin1234 
Member - Posts: 5
Member spacespace
Joined: December 15, 2011
Location: Texas, United States
Posted: December 15, 2011 at 7:17 AM / IP Logged  
could i connect the second ignition wire input to a constant power source and connect the second ignition output directly to the second ignition on the ford second ignition wire
ceasar326 
Copper - Posts: 239
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 02, 2006
Location: Minnesota, United States
Posted: December 15, 2011 at 12:08 PM / IP Logged  
Use the (-) pink wire from Remote start auxiliary output 5pin
with a relay connect the (-) pink wire from your 5901 to 86, then connect constant 12v to 30 and 85. then run 87 to you 2nd ing wire of your truck and that should do it.
theghostman01 
Member - Posts: 27
Member spacespace
Joined: December 13, 2011
Location: Quebec, Canada
Posted: December 15, 2011 at 12:41 PM / IP Logged  
Nice job ceasar !
ThE GhOsTmAn01
ceasar326 
Copper - Posts: 239
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 02, 2006
Location: Minnesota, United States
Posted: December 15, 2011 at 12:46 PM / IP Logged  
No problem trying to help as much as i can.
valentin1234 
Member - Posts: 5
Member spacespace
Joined: December 15, 2011
Location: Texas, United States
Posted: December 16, 2011 at 8:31 AM / IP Logged  
thks man
valentin1234 
Member - Posts: 5
Member spacespace
Joined: December 15, 2011
Location: Texas, United States
Posted: December 16, 2011 at 8:52 AM / IP Logged  
ok so now if i have an acessory 2 will it hook up the same or that another way
valentin1234 
Member - Posts: 5
Member spacespace
Joined: December 15, 2011
Location: Texas, United States
Posted: December 16, 2011 at 8:55 AM / IP Logged  
so if i have an acessory 2 will it hook up the same or that different way
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: December 16, 2011 at 4:57 PM / IP Logged  
What did you connect the H3/7 to?
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer