the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 Nissan Altima PTS Remote Start Pictorial


Post ReplyPost New Topic
< Prev Topic Next Topic >
lucasoil4u 
Copper - Posts: 317
Copper spacespace
Joined: May 11, 2009
Location: Minnesota, United States
Posted: February 18, 2014 at 9:53 AM / IP Logged  
There is ignition (+) at te ODB2 Port. I always use the Idatalink modules and you dont have anything go to the bcm at all. Its like 1 hour install.
tbird2340 
Copper - Posts: 363
Copper spacespace
Joined: October 03, 2003
Location: Ohio, United States
Posted: February 18, 2014 at 1:40 PM / IP Logged  
Looking at the idatalink guide it says you do need to go to the BCM for arm/disarm..
How are you getting away without doing that?
Thanks
CanH M24 White 16 pin 006 Blue (DATA) OBDII connector ~
CanL M24 White 16 pin 014 Pink (DATA) OBDII connector ~
Immobilizer clock M40 White 12 pin 002 GREEN/ Orange (DATA) Keyport ~
Immobilizer data M40 White 12 pin 003 Orange (DATA) Keyport ~
Keysense M40 White 12 pin 011 Yellow (-) Keyport ~
PTS M38 Brown 08 pin 004 Brown (-) Push button ~
Ignition M24 White 16 pin 008 Green (+) OBDII connector ~
Brake E38 White 04 pin 002 RED / Green (+) Brake switch ~
Lock/Arm M18 Green 40 pin 056 Empty (-) BCM, behind cluster ~
Unlock/Disarm M18 Green 40 pin 034 Empty (-) BCM, behind cluster ~
Satkunas 
Copper - Posts: 97
Copper spacespace
Joined: April 04, 2005
Location: Canada
Posted: February 18, 2014 at 1:59 PM / IP Logged  
Fortin now has T-Harnesses available for Nissan and Infiniti which help for a much faster installation than with the ADS or Xpresskit modules.
https://ifar.ca/en/products/t-harness_cables/thar-nis1/
The EVO-ALL can also do stand-alone remote-stater and alarm-system so no RS/A module is required. If you need extended range you can simply plug any RF-Kit directly into the module.
buddyle2002 
Member - Posts: 39
Member spacespace
Joined: December 04, 2005
Location: United States
Posted: October 28, 2014 at 8:58 PM / IP Logged  
Just want to update if anyone else needs this lock and unlock connection wires color.
Lock === Gray
Unlock == Green
On 2011 Nissan Altima Sedan 2.5S - At kick panel.
2010 Nissan Altima PTS Remote Start Pictorial - Page 5 -- posted image.
Page of 5

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, September 27, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer