2011 silverado w/ viper 5701 and db all

Home / the12volt's Install Bay / Car Security and Convenience / 2011 silverado w/ viper 5701 and db all (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

flyboy12

Member - Posts: 11

Joined: December 16, 2011

Location: South Dakota, United States

Posted: December 17, 2011 at 4:18 PM / IP Logged

I did connect the green to ground...

I think the problem is that its not staying in Auto mode. every time i retry it there is only one chirp when entering tranny mode, meaning it is still in manual. i have a bitwriter coming on tuesday...

what do you think?

smokeman1

Platinum - Posts: 1,589

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: December 17, 2011 at 4:49 PM / IP Logged

Are you getting two chirps and then waiting for it to exit the programing? Otherwise I'm puzzeled

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

flyboy12

Member - Posts: 11

Joined: December 16, 2011

Location: South Dakota, United States

Posted: December 17, 2011 at 4:56 PM / IP Logged

sometimes its the simplest of things that casue so much trouble!!

I was not entering menu 3, only menu 2. i would hear a TOTAL of 3 chirps and i thought that was menu three, wrong.

So i got it into auto mode, and made sure i didnt mess anything up in menu 2.

now it attempts to start 3 times, the starter never engages. I did the procedure to find possible faults by the # of flashes on the LED. 9 flashes=low battery(Voltage Mode) ??

dont i want Virtual Tach?

flyboy12

Member - Posts: 11

Joined: December 16, 2011

Location: South Dakota, United States

Posted: December 17, 2011 at 6:38 PM / IP Logged

Well after messing around i got it to remote start. Engine Checking mode is OFF. Crank Time is 1.4 seconds.

Should I leave it be? It seems to me that Virtual Tach would be better.

smokeman1

Platinum - Posts: 1,589

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: December 17, 2011 at 7:51 PM / IP Logged

I would think that since you are wired D2D, the DB All is taking care of the Tach. Glad to hear you got it started.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2011 silverado w/ viper 5701 and db all

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.