2000 gmc jimmy, viper 5902

Thank you Tedmond... I wired the FT-6000AS Blade-TB to the 2000 GMC Jimmy SLT It starts with the remote then shuts off because it does not sense the tach. The Blade showed it learned by lighting green. Also, the door looks do not work with the remote. Guessing I need to wire in the tach and door lock/unlock

I forgot to ask... Could the problems im having also be because I need to wire in the 2nd ignition relay (red wires Violet ground & relay) ?

I wanted to make sure you all know that I did try the tach learn process. And it does not work?

it it starts and shuts off it means you have a bypass issue. To learn tach start vehicle with key, step and hold the brakes, press start on the remote. the unit will click once to indicate tach learn. the other problem is you used the wrong bypass. The correct bypass should have been the BLADE-AL. That would have done locks, triggers etc for you. It would have been a better route for your application. You have to hard wire the locks now.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Ah, So The 2000 GMC Jimmy SLT will use the Blade-AL also? Idatalink showed to use the Blade-TB... I did the tach learn process you explained, it does not work keep getting 2 beeps not just 1 to indicate that it learned it.

the 2000 gmc jimmy would use the blade tb. the blade al would have done tach for you. this is what you need to do, run the yellow/black tach input to an injector or tach. get the vehicle to start, then do door locks after. Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

2000 GMC Jimmy SLT Compustar FT 6000AS While using the Blade AL I get tach, dome light, door triggers, door lock But I do not get unlock? I also have the Blade TB That would require w2w All the wiring diagrams that I have seen only show (+) for the door unlock and lock The instruction for the FT 6000 AS Call for the door locks, unlocks & trunck release to connect with a negative (-) 250mA Please forgive me for the NOOB questions as this is my frist install. Thank you all for all your help!!!

Does this require bypass module? If it does please let me know the best one. Please help Installing Viper 5902 in a 2000 GMC Jimmy.

Thank you all for all the help... The engine light comes on and stays on after I remote start the GMC Jimmy ??? I have reset the engine light witch will stay off until I use the remote start then it lights up again. Is this because I have not connected the 2nd ignition?

The AL on that car does passlock and tach. That is it. The TB does passlock only