setting my mono block and 4 channel amp?

Home / the12volt's Install Bay / Car Audio / setting my mono block and 4 channel amp? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

dirtybass

Member - Posts: 13

Joined: February 06, 2012

Location: Alabama, United States

Posted: February 28, 2012 at 3:48 PM / IP Logged

So I've Set my gains at a good level now frequency wise I'm having trouble. My 4 channel amp is both on HPF . But setting my hz on everything is still confusing. My speakers are getting too much bass? Plus wouldn't the settings on my full ranges in the back be different from my settings on my 2 ways? They have a passive crossover

Back to Top

z03mz03m

Copper - Posts: 244

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 09, 2010

Location: Delaware, United States

Posted: February 28, 2012 at 4:44 PM / IP Logged

If your speakers are the same size diameter and they are both D series then they should have almost identical frequency response's. Also the Coaxial speakers do have a much smaller crossover built onto them.

If they are getting too much bass then you need to turn the crossover frequency to a higher frequency (typically between 70-100Hz).

Dodge Magnum in progress:

Pioneer DEH-80PRS - PPI Amps - Dayton Subwoofer(s) - Exodus Anarchy's - Vifa Tweeters - Kinetik Battery

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

setting my mono block and 4 channel amp?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.