ford150 2011 with viper 5901

looking by the manual viper 5901, i found this. this would work really????? 13. Door Switch Type 1. Normally Open: for vehicles with door switches that rest at ground when the door is OPEN 2. Normally Closed: for vehicles with door switches that rest at ground when the door is CLOSEDTomas Smith Fernandez

Sorry, of course it well. The fix was for earlier versions, also if the vehicle spec sheet says nothing about factory alarm then the answer is in one of those Tech Tips I mentioned yesterday.

ok i manage to config the alarm for work BUT (there´s always a BUT), i got connected 4 door triggers, when i open one nothing happens, when i open the all four doors the triggers works, this is completely normal cause all the doors that are closed keep sending the negative pulse, i make some research and by relay you can convert the 1 negative input of the alarm into four independent, but how can i do this? anybody has a diagram for this? thanks a lotTomas Smith Fernandez

This is all I can think of, the DTIMazda part shown in one of those tech tips.

yep i thought the same thing so im doing the thing with the 10k resitors. i just installed the 1st unlock and 2nd unlock works like a charme lol. thanks a lot!!!!!!!!!!!!!!!Tomas Smith Fernandez

finally the alarm is fully working as i want BUT (here comes the but again), the remote keep telling me remote star error. i doesnt have pkall yet but im trying to remote start with the key in the ignition. so this would work? without pkall and the key in the ignition if the remote start is correctly install the truck should start? thanks a lot!!!!!!!Tomas Smith Fernandez

Is the F150 an Automatic transmission vehicle?  Is the Viper still in Manual Transmission Mode?

Did you connect the Neutral Safety wire?

Did you plug in the Neutral Safety Switch and set it to ON?

Which "Engine Checking Mode" are you using?

Can you list your H3 harness to vehicle connections?

There are Shutdown Diagnostics that should help define the problem.  What do they indicate? 

Soldering is fun!