the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5704, 2003 acura rsx


Post ReplyPost New Topic
< Prev Topic Next Topic >
unplugme71 
Member - Posts: 26
Member spacespace
Joined: May 15, 2012
Location: New Jersey, United States
Posted: May 15, 2012 at 7:28 AM / IP Logged  

I have a question on the following wires for a Viper 5704 alarm/remote start on 2003 Acura RSX Type-S.

H1/4 WHITE/ Brown Parking Light Isolation Wire: Not Used?

H1/6 Orange 500mA Ground When Armed Output: Where does this go to?

H3/1 Pink Ignition 1 Input/Output: Where does this go to?

H3/2 RED / White Fused Ignition 2: Where does this go to?

H3/3 Orange Accessory Output:

H3/4 Violet Starter Output: BLACK/ White - Key or Car Side ?

H3/5 Green Starter Input: BLACK/ White - Key or Car Side ?

H3/6 Red Fused Ignition 1 Input: Where does this go?

H3/7 Pink/White Ignition 2 / Flex Relay Output: Where does this go?

H3/8 Pink/Black Flex Relay Input 87A Key Side of Flex Relay: Not Used?

H3/9 RED / Black Fused Accessory/Starter Input: Where does this go?

I see that Ignition 1, Ignition 2, and Accessory are listed twice in the H3 harnesses. Does this mean the wires get cut like the starter wire?

'03 Acura RSX Type-S
unplugme71 
Member - Posts: 26
Member spacespace
Joined: May 15, 2012
Location: New Jersey, United States
Posted: May 15, 2012 at 7:32 AM / IP Logged  

Forgot to add the following:

H2/1 Pink/White 200mA Ignition/Flex Relay Control Output: Where does this go, or not used?

H2/10 Pink 200mA Ignition 1 Output: Where does this go?

H2/12 Violet Door Trigger Input (+) - Not used? (RSX has - door trigger so I'm using H2/6 Green instead.

H2/22 Orange 200mA Accessory Output: Where does this go?

'03 Acura RSX Type-S
kreg357 
Platinum - Posts: 7,644
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: May 15, 2012 at 8:30 AM / IP Logged  

H1/4 WHITE/ Brown Parking Light Isolation Wire:   Not Used

H1/6 Orange 500mA Ground When Armed Output:      Not Used

H3/1 Pink Ignition 1 Input/Output:              BLACK / YELLOW @ Ignition Switch Harness

H3/2 RED / White Fused Ignition 2: White @ Ignition Switch Harness
H3/3 Orange Accessory Output:                BLACK/ Red @ Ignition Switch Harness
H3/4 Violet Starter Output:             BLACK/ White cut @ Ignition Switch Harness - Car Side
H3/5 Green Starter Input:              BLACK/ White cut @ Ignition Switch Harness - Key Side
H3/6 Red Fused Ignition 1 Input:            White @ Ignition Switch Harness
H3/7 Pink/White Ignition 2 / Flex Relay Output:     WHITE/ Red @ Ignition Switch Harness    ***Set Viper for ACC2***
H3/8 Pink/Black Flex Relay Input 87A : Not Used
H3/9 RED / Black Fused Accessory/Starter Input:   White @ Ignition Switch Harness

Soldering is fun!
kreg357 
Platinum - Posts: 7,644
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: May 15, 2012 at 8:32 AM / IP Logged  
H2/1 Pink/White 200mA Ignition/Flex Relay Control Output: not used
H2/10 Pink 200mA Ignition 1 Output: not used
H2/12 Violet Door Trigger Input (+) - Not used.       (RSX has - door trigger so use H2/6 Green instead. )
H2/22 Orange 200mA Accessory Output:         not used
Soldering is fun!
unplugme71 
Member - Posts: 26
Member spacespace
Joined: May 15, 2012
Location: New Jersey, United States
Posted: May 15, 2012 at 8:37 AM / IP Logged  

thanks!

'03 Acura RSX Type-S
unplugme71 
Member - Posts: 26
Member spacespace
Joined: May 15, 2012
Location: New Jersey, United States
Posted: May 15, 2012 at 8:41 AM / IP Logged  
kreg357 wrote:

H1/4 WHITE/ Brown Parking Light Isolation Wire:   Not Used

H1/6 Orange 500mA Ground When Armed Output:      Not Used

H3/1 Pink Ignition 1 Input/Output:              BLACK / YELLOW @ Ignition Switch Harness

H3/2 RED / White Fused Ignition 2: White @ Ignition Switch Harness
H3/3 Orange Accessory Output:                BLACK/ Red @ Ignition Switch Harness
H3/4 Violet Starter Output:             BLACK/ White cut @ Ignition Switch Harness - Car Side
H3/5 Green Starter Input:              BLACK/ White cut @ Ignition Switch Harness - Key Side
H3/6 Red Fused Ignition 1 Input:            White @ Ignition Switch Harness
H3/7 Pink/White Ignition 2 / Flex Relay Output:     WHITE/ Red @ Ignition Switch Harness    ***Set Viper for ACC2***
H3/8 Pink/Black Flex Relay Input 87A : Not Used
H3/9 RED / Black Fused Accessory/Starter Input:   White @ Ignition Switch Harness

Thanks again!

I have a few more actually:

H2/9 Dark Blue

H2/11 WHITE/ Black

H2/18 Violet / YELLOW

H2/21 WHITE/ Blue

For H2/13 - H2/15 those are used for accessories? Like tilt, motion, glass break?

'03 Acura RSX Type-S
unplugme71 
Member - Posts: 26
Member spacespace
Joined: May 15, 2012
Location: New Jersey, United States
Posted: May 15, 2012 at 8:46 AM / IP Logged  
I also noticed you said to set Viper for ACC2, how do I do that?
'03 Acura RSX Type-S
kreg357 
Platinum - Posts: 7,644
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: May 15, 2012 at 9:02 AM / IP Logged  
Download the Viper install guide from the "Downloads" section if you don't have it.  There are several programming
options that will need to be changed.  To change the Flex relay from its' factory default of IGN2 to ACC2, change
Menu 3, Item 8 to Option 2.  Other common options to check are Transmission Mode ( Menu 3, Item 1 ) and Engine Checking
( Menu 3, Item 2 ).  Tach mode is usually the most reliable. 
Soldering is fun!
unplugme71 
Member - Posts: 26
Member spacespace
Joined: May 15, 2012
Location: New Jersey, United States
Posted: May 15, 2012 at 9:09 AM / IP Logged  

I don't have access to Directed Techs as I'm not a dealer. I could not find downloads on viper.com's web site unless I completely over looked it.

This is the only thing I could get access to: http://www.directeddealers.com/manuals/OG/Viper/G5704V%202011-08%20web2.pdf

The car is a manual transmission. I'm guessing I have to press the brake, lift the parking brake, press a button on the keypad, and then open the door, walk out, close door, arm so the system knows I left the vehicle not in gear?

'03 Acura RSX Type-S
kreg357 
Platinum - Posts: 7,644
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: May 15, 2012 at 9:15 AM / IP Logged  

Yes, that is correct for a manual trans mode install.  You will need to run in Tach Mode, and connect the door triggers

to monitor the doors.  Also you will need to bypass the clutch pedal interlock switch.  Try using the Viper 5904
Install Guide, it's in the Downloads section.

H2/9 Dark Blue   Used for the bypass module if going in W2W mode.  Your car should need a bypass module for

a remote start.  Which bypass module are you using?

H2/11 WHITE/ Black AUX3, if used.

H2/18 Violet / YELLOW Not used

H2/21 WHITE/ Blue   Not used

For H2/13 - H2/15 those are used for accessories? Like tilt, motion, glass break?   No, used to contol optional

things like window roll-up / roll-down, memory seats, etc.

Soldering is fun!
Page of 4

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, February 7, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer