viper 5704, 2004 honda civic

Home / the12volt's Install Bay / Car Security and Convenience / viper 5704, 2004 honda civic (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

partypeepers

Member - Posts: 24

Joined: September 14, 2012

Location: California, United States

Posted: September 19, 2012 at 5:02 PM / IP Logged

well i have a question for the parking light isolation wire it says to replace fuse with the specified resistor but what resistor do i use for this?

cesara

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 19, 2012 at 5:11 PM / IP Logged

A resistor?

Really?

Make your white wire NEG and go to pin 13 blue on the green factory alarm plug above driver kickwell, more or less what I said above.

partypeepers

Member - Posts: 24

Joined: September 14, 2012

Location: California, United States

Posted: September 19, 2012 at 5:15 PM / IP Logged

i dont have a factory alarm

cesara

partypeepers

Member - Posts: 24

Joined: September 14, 2012

Location: California, United States

Posted: September 19, 2012 at 5:17 PM / IP Logged

ok so i dont need to connect the white and brown wire isolation wire? its not needed? its or a 04 honda. just wasnt sure if my car had multiplex circuit. so then i just switch the polarity on the alarm to (-) and connect the white wire to my (-) parking lights. and thats it?

cesara

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 19, 2012 at 5:21 PM / IP Logged

Yes and let's not waste any more time on silly questions about resistors, only relevant to some manufacturer's NOT Honda locks and lights.

No m/plex on them.

No please stop assuming and be a good lad and have a look for that green plug please.

partypeepers

Member - Posts: 24

Joined: September 14, 2012

Location: California, United States

Posted: September 19, 2012 at 5:23 PM / IP Logged

ok got that question out the way. thank you..

cesara

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: September 19, 2012 at 6:48 PM / IP Logged

Wow! I stepped away for a couple hours. Put the siren where ever you want it. If under the hood, face the horn down so water doesn't get in it. Run the wires back to the brain and connect. You can ground it under the hood and run the red back to the brain. Run the hood pin wire and tach wire out at the same time.

Lock/Unlock, connect the blue and green wires to the proper wires on the car. TEST.

What bypass are you using?

As Howie states, a easy install to do. Easy as a ford focus. badda boom, badda bing....

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

partypeepers

Member - Posts: 24

Joined: September 14, 2012

Location: California, United States

Posted: September 19, 2012 at 7:33 PM / IP Logged

I'm using the pkh34 from xpresskits have you installed this alarm yet?

cesara

91stt

Silver - Posts: 564

This member consistently provides reliable information

Joined: May 24, 2006

Location: New Jersey, United States

Posted: September 19, 2012 at 7:39 PM / IP Logged

what is the year, make and model of your vehicle?

what are you trying to hook up?

This information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

partypeepers

Member - Posts: 24

Joined: September 14, 2012

Location: California, United States

Posted: September 19, 2012 at 7:48 PM / IP Logged

My car is a 2004 Honda civic dx. im trying to figure out how to hook up the parking light wire that comes out the alarm there is 2 wires one of them says for isolation and the other just says parking light its a viper 5704

cesara

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.