ignition kill relay on alarm not working

hang on....think i've just realised what i've done wrong. can't believe i've not missed it either, i've wired the ground (- battery on the diagram) to the ACC.

At least you found it having probably fried the first alarm. Ref. the wiring, I think I already alluded to that on page 3. Crikey 5 bloody pages based on mistakes and not listening. Read my signature lines please. No key switch side to 87a and starter side to 30. Ignition to 86 and white from alarm to 85. Running a constant wire to 86 will drain your battery over night if the alarm is left on.

I'll ground the alarm, then so if the starter kill works as it's already wired as you said. My original problem was the alarm wouldn't trigger negative to the relay when activated, makes sense why now..there was no ground to the alarm, so it couldn't.

Of course hence the magic phrase, "test and verify".

ok, all's working 100%. starter kill works now.