2005 malibu maxx 2way car alarm

Actually, on a predecessor sister car, Peugeot 106 (think Chevys and Pontiacs)I managed to drill a fuel line on TWO separate occasions!

ok so i am leaveing an update hooked tach wire up... when i start it sometimes it stays running and set for run time 20 minutes other ties it runs for 30 seconds and shuts down what could be possibly causing this any ideas...

Double check all your connections, especially the chassis grounds.  As a matter of course, all connections should be well soldered and properly insulated.  Aside from that, there is the slightest possibility that your imported R/S unit is not of the highest quality...  Soldering is fun!

Slightest? How many hints do you need madMaxx? Sorry but I did hint at that probability earlier.

Maybe  as Howie and Kreg imply that this not being the highest quality unit, you might want to trash can the whole thing and get a more reliable unit to avoid issues days or months or hours from now.  You have it all open, just a matter of swapping units and wire harness.When all else fails, Read the Instructions

Support the12volt.com Make a Donation

i will check my grounds and all my wires. i plan on soldering connections but want to make sure it all works before makeing it more perminant. I would switch it out but wifey dont want me to spend the money lol says i best figure it out or she is going to duel me in a game we play called everquest and kill me lol... she is a cleric and im a warrior lol

Bin it or the wife's going to kill you

Nice one Howie....When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Well , i hope everyones turkey day was great. At this current time I am now haveing a hard to get the remote start part of said alarm(trash) to even start. so now im back to the drawing board. If someone could re look over page 1 of this post maybe soething is left out (or not) just curious as to why it was doing what it was and now it wont start at all, without useing the key

ok so i reviewed everything from this post, double and triple checked connections, now unless im a total retard, (id like to think im not but thats up for debate lol) the remote start should work properly... but at this point dash lights com on and alarm box just clicks ( no start what so ever at this point) and led light does not blink or even respond to presses of the valet switch. doors will lock and unlock still and alarm works but no led reponse nor and remote start, cant even get into programing mode like i was before, Please any help would be great .. Thankyou