viper 5704, 530t, comfort closure

Disregard the last post. Can I also use an aux output like this instead of splicing into the shock sensor which is not mounted close to the 530T. Aux 1 Output Type (H2/13 wire) 1. Timed: set to 10 seconds 10. Aux 1 Linking 1.Link to Disarm: the Aux output will activate for the Disarm command

That linking will only work when using that Aux channel to operate something that needs the alarm to disarm first. You are asking for quite the opposite. You want to prevent the sensor from triggering with the alarm armed while the 530T is operating. That relay diagram looked good but I would use the black ground connection from the shock sensor not the blue instant trigger wire.

CORRECTION - The relay diagram is not correct. Pin 87a should not have 12v constant. That could fry the sensor or the Viper. See my setup info for the relay in my prior responses.

shortcircuit161 thanks for all the clarification!