viper smartstart on ultrastart?

Home / the12volt's Install Bay / Car Security and Convenience / viper smartstart on ultrastart? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: January 30, 2013 at 11:00 AM / IP Logged

I have a customer interested in a Viper SmartStart and he was told that it would work with his UltraStart remote starter... but everything I can find says that it is only compatible with DEI systems...

Any insight?

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 30, 2013 at 1:32 PM / IP Logged

Contact UltraStart?

It depends on the connection data protocols, maybe you should ask Fortin or Idatalink!

dasbogie

Silver - Posts: 514

Joined: September 30, 2006

Location: Pennsylvania, United States

Posted: January 30, 2013 at 1:41 PM / IP Logged

You need to find the module with analog outputs. It has provisions to connect to the activation input on any remote start as well as door locks and 1 aux I believe

Advanced

offroadzj

Gold - Posts: 2,043

Joined: June 03, 2005

Location: New York, United States

Posted: January 30, 2013 at 1:42 PM / IP Logged

I know the Compustar Drone has the analog outputs but I can't find anything for the Viper.

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

dasbogie

Silver - Posts: 514

Joined: September 30, 2006

Location: Pennsylvania, United States

Posted: January 30, 2013 at 1:46 PM / IP Logged

Hit up crutchfield and search dsm250, click on details then scroll down half way down the page it says on the right"what's in the box". Click the link to the manual. Page down and you'll see it has analog outputs. I installer beware it has a note that the analog outs have to be enabled In the installation portal

Advanced

lucasoil4u

Copper - Posts: 317

Joined: May 11, 2009

Location: Minnesota, United States

Posted: January 31, 2013 at 10:08 AM / IP Logged

Call directed tech support and see if it will work . they will give you best answer.

vane0804

Member - Posts: 40

Joined: November 15, 2007

Location: Illinois, United States

Posted: December 10, 2014 at 7:36 PM / IP Logged

did anybody find the answer to this question? Is SmartStart able to be installed on any system (using the 5-pin cable)?

~It's me!

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 10, 2014 at 9:43 PM / IP Logged

hey kenny, i tried sending you a PM, but your inbox is full.

Congratulations on the business!

The VSM200 and VSM250 both have a 5pin harness for analogue connections. Make all hardwired connections to the ultrastart and hopefully the bypass is in w2w so you can just send signals to it.

when you activate the smart start, you will then specify during setup online that its for analogue and not data. You have to activate it through directechs, or it wont work.

1) login to directechs.com

2) under resources go to smartstart activation

3) use the password and login provided and activate

4) use their online tester to make sure the vehicle has a good gps signal lock.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper smartstart on ultrastart?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.