the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

clifford 590.2 toggle switch off

Home / the12volt's Install Bay / Car Security and Convenience / clifford 590.2 toggle switch off (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: March 04, 2013 at 8:20 PM / IP Logged  
When you get to Menu1, Item 5, Press the lock OR unlock button until you get two chirps. You should get 1 to 4 chirps for each of the four option for Item 5. You want 2 chirps for ignition lock/unlock.  When you get 2 chirps, STOP. let go of the button wait 30-40 seconds for the system to time out of programing, the siren will sound one short blast when the system has exited programming. Hopefully it will stick.
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
adrianotech 
Copper - Posts: 53
Copper spacespace
Joined: February 01, 2013
Location: Connecticut, United States
Posted: March 05, 2013 at 4:41 PM / IP Logged  
  Hi smokeman1, I did  all just the way you told , I  heard  all chirps and waited until siren sounds ......but nothing.......
adriantech
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: March 05, 2013 at 5:29 PM / IP Logged  
Don't know what to tell you on it anymore.  Maybe you can find someone with a BitWriter that can access the brain to make that setting.
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
adrianotech 
Copper - Posts: 53
Copper spacespace
Joined: February 01, 2013
Location: Connecticut, United States
Posted: March 05, 2013 at 6:06 PM / IP Logged  
what you think i switch to w2w and connect the 3 pin wires from the rs?
adriantech
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: March 05, 2013 at 8:24 PM / IP Logged  
Worth a try...your call
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
adrianotech 
Copper - Posts: 53
Copper spacespace
Joined: February 01, 2013
Location: Connecticut, United States
Posted: March 05, 2013 at 8:44 PM / IP Logged  
Thanks for all your help so far...I really appreciate it.
adriantech
Page of 5

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer