clifford 590.2 toggle switch off

Home / the12volt's Install Bay / Car Security and Convenience / clifford 590.2 toggle switch off (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

adrianotech

Copper - Posts: 53

Joined: February 01, 2013

Location: Connecticut, United States

Posted: March 03, 2013 at 5:32 PM / IP Logged

any help please?

adriantech

smokeman1

Platinum - Posts: 1,589

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: March 03, 2013 at 6:31 PM / IP Logged

Need to get into Menu 1, Item 5, Option 1-no lock/unlock, Opt 2, Lock and Unlock, Opt 3 Lock Only, Opt 4 Unlock Only.

You need to access the menus for this. If you can't access the menus, check your wiring and your menu access procedures. Page 11 of install manual.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

adrianotech

Copper - Posts: 53

Joined: February 01, 2013

Location: Connecticut, United States

Posted: March 03, 2013 at 7:47 PM / IP Logged

is possible to set those ficture without 3 pin wires from remote start? because im using data mode from the idatalink.

adriantech

adrianotech

Copper - Posts: 53

Joined: February 01, 2013

Location: Connecticut, United States

Posted: March 03, 2013 at 7:49 PM / IP Logged

i dont have a manual install can you copy a link to me?

adriantech

smokeman1

Platinum - Posts: 1,589

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: March 03, 2013 at 8:40 PM / IP Logged

Amazing that you have been installing this without instructions/install manual. No wonder you are having so many issues...Good Luck.

https://www.the12volt.com/installbay/downloads.asp?srch=all&term=5902 Link to THIS SITE down load section.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

adrianotech

Copper - Posts: 53

Joined: February 01, 2013

Location: Connecticut, United States

Posted: March 04, 2013 at 11:50 AM / IP Logged

I'm so sorry man actually I have the installation guide, I tough you had a step by step instruction manual , you're the man , anyways I think I have to hook up the door locks 3pin wires from Remote start brain and disconnect the door lock from I data link, maybe this ficture will work , what I am trying to set is lock after ignition on and unlock ignition off , I have set menu 1, item 5 , option 2 but its not. Working..

adriantech

smokeman1

Platinum - Posts: 1,589

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: March 04, 2013 at 4:00 PM / IP Logged

You get into Menu 1, using the same procedure you used to get into menu 3 to change it from manual to automatic. Only stop at menu 1. How were you able to accomplish that before? Do it again to get to menu 1. Maybe D2D is malfunctioning.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

adrianotech

Copper - Posts: 53

Joined: February 01, 2013

Location: Connecticut, United States

Posted: March 04, 2013 at 4:26 PM / IP Logged

I did get into the menu 1 and the ficture too but everything sounds to be fine but dont work , like I open the door turn the ignition on and then off press and hold the the botton the siren chirps once i relese the botton and press 5 times and then one more and hold with the remote start i press the open door botton that represent ficture 2. but the door does not unlock after turn ignition off or relese the key.

adriantech

smokeman1

Platinum - Posts: 1,589

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: March 04, 2013 at 7:25 PM / IP Logged

Alright, the siren chirps once for menu 1. Does it then chirp 5 times to indicate you are in item 5? Or does it chirp for any item? How many chirps? The alarm will chirp the number for what item you are in. If not, start over and keep trying. I can take a few time to get the hang of it.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

adrianotech

Copper - Posts: 53

Joined: February 01, 2013

Location: Connecticut, United States

Posted: March 04, 2013 at 7:36 PM / IP Logged

yes the siren chirps once for menu, 5 times for item and chirps for the number of option selected .

adriantech

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.