viper 4704 no start

Home / the12volt's Install Bay / Car Security and Convenience / viper 4704 no start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

perfecthrasher

Member - Posts: 19

Joined: December 13, 2011

Posted: July 23, 2013 at 9:47 PM / IP Logged

Got it as far as I recall the device type selected was other so the recommended install mode was iDatalink 2 way so I did flash it with the wrong firmware. I'll have another go tomorrow thx Kreg!!

Back to Top

Search for other posts by perfecthrasher

kreg357

Platinum - Posts: 7,787

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: July 24, 2013 at 3:31 AM / IP Logged

Yes, should be DBI-AL(DL)-NI4-EN version 1.7. Follow the correct diagram in install guide #10934 and set the

ADS AL-CA's Installation mode to Type 1 ( one Blink - Data Mode ) & lock it in for D2D communications with the Viper.

Soldering is fun!

Back to Top

perfecthrasher

Member - Posts: 19

Joined: December 13, 2011

Posted: July 27, 2013 at 6:32 PM / IP Logged

Thx again Kreg I hurt my back was out for a week just go off my ass did a reflash works!! Going to cleanup some of the wiring but again all appears to be good thankyou very much!!

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 4704 no start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.