spall door locks with dual swithches

Home / the12volt's Install Bay / Car Security and Convenience / spall door locks with dual swithches (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

jr789

Member - Posts: 23

Joined: July 26, 2013

Location: Missouri, United States

Posted: July 31, 2013 at 9:03 PM / IP Logged

Many Thanks again and most appreciated !!! spall door locks with dual swithches - Page 2 -- posted image.

jr789

Member - Posts: 23

Joined: July 26, 2013

Location: Missouri, United States

Posted: September 21, 2013 at 11:17 PM / IP Logged

As a follow up on the installation of the spal power door locks, i purchased a Viper 211HV key-less entry unit. Everything is for the most part understandable but the five wires that operate the door locks do not make sense, im using the spal module with one centralized switch. Can anyone clue me in what needs to go where??? https://www.the12volt.com/installbay/forum_posts.asp~TID~134606~PN~1~TPN~1#680934

jr789

Member - Posts: 23

Joined: July 26, 2013

Location: Missouri, United States

Posted: September 22, 2013 at 12:38 PM / IP Logged

Now after a lot of gibberish. How about some technical help relating to the post??

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

spall door locks with dual swithches

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.