ads blade al for 05 jetta windows?

Does the ADS-BLADE AL roll the windows up/down in this car? I've been using DEI bypass modules and looking to explore new options, but my last customer has the DBALL2 which rolls the windows down via the databus, but not up for some reason. I've been searching for a solution for him but can't find one. Any help would be appreciated! No question is stupid or not worth asking. You were once a noob, right? :)

*bump* Anyone?No question is stupid or not worth asking. You were once a noob, right? :)

I'm guessing aux 1 on dball is programmed for window down. So now program aux 2 for front window up and aux 3 for back window up.

I tried that and it doesn't work. I also tried the gas door on aux2, that doesn't work either.No question is stupid or not worth asking. You were once a noob, right? :)

What brand of remote start on that vehicle? Do you have the brain aux set to constant or latched output?

It has the Viper 5202. I haven't configured the aux outputs at all on the Viper because it's using D2D mode.No question is stupid or not worth asking. You were once a noob, right? :)

Factory default is set to validity so you have to hold down the aux button continuously until windows are up then release button.

Right, but the windows up doesn't work at all, Windows down does...No question is stupid or not worth asking. You were once a noob, right? :)

Which 2 aux you have windows to go up? What buttons you pressing on viper remote for each aux?

Aux1 = Front Windows Down = (F)x1 + aux (works) Aux2 = Rear Windows Down = (F)x2 + aux (works) Aux3 = Windows Up = (F)x3 + aux (doesn't work) I can program Windows Up to any of the aux channels, and it doesn't work. But, going back to the original question, does the ADS Blade control the windows? If so, I'm just going to swap out the bypass. These DBALL units have been a thorn in my side.No question is stupid or not worth asking. You were once a noob, right? :)