Viper 5706v, 2010 Hyundai Elantra

Home / the12volt's Install Bay / Car Security and Convenience / Viper 5706v, 2010 Hyundai Elantra (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 06, 2014 at 3:53 AM / IP Logged

No.

wissam1981

Copper - Posts: 116

Joined: July 24, 2014

Location: Florida, United States

Posted: September 06, 2014 at 4:32 AM / IP Logged

it wouldn't learn the TACH

Please check my connection

Viper 5706v, 2010 Hyundai Elantra - Page 13 -- posted image.

wissam1981

Copper - Posts: 116

Joined: July 24, 2014

Location: Florida, United States

Posted: September 06, 2014 at 4:47 AM / IP Logged

howie ll wrote:

1) See 2 and 3

2) Read the programming instructions H2/15 GREEN must be connected to a door pin (see fitting guide) or GROUNDED.

this is what you said

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 06, 2014 at 4:59 AM / IP Logged

What else apart from the BLACK/ white is connected to ground?

Also is the pink on H3 connected to ignition?

wissam1981

Copper - Posts: 116

Joined: July 24, 2014

Location: Florida, United States

Posted: September 06, 2014 at 5:03 AM / IP Logged

BLACK/ white (-) NEUTRAL SAFETY /PARKING BRAKE INPUT yes connected to ground

yes pink connected to ignition

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 06, 2014 at 5:34 AM / IP Logged

I see a RED / black also connected.

wissam1981

Copper - Posts: 116

Joined: July 24, 2014

Location: Florida, United States

Posted: September 06, 2014 at 5:39 AM / IP Logged

wissam1981 wrote:

it wouldn't learn the TACH

you mean this image ?

RED / black for siren

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 06, 2014 at 5:41 AM / IP Logged

RED / black for siren goes to brown on H1, black on siren to ground.

It means you've done something else wrong. I don't know what.

wissam1981

Copper - Posts: 116

Joined: July 24, 2014

Location: Florida, United States

Posted: September 06, 2014 at 5:49 AM / IP Logged

just double check

H1 (+)12VDC CONSTANT INPUT

H3/2 RED / BLACK (+) FUSED 12V ACCESSORY/STARTER INPUT

H3/5 RED (+) FUSED 12V IGNITION 1 INPUT

H3/9 RED / WHITE (+) FUSED 12V IGNITION 2 / FLEX RELAY INPUT 87

all to 12v ignition switch

do i need H3/9 cause my vehicle don't have ignition 2

right?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 06, 2014 at 6:14 AM / IP Logged

H3/2 RED / BLACK (+) FUSED 12V ACCESSORY/STARTER INPUT

H3/5 RED (+) FUSED 12V IGNITION 1 INPUT

H3/9 RED / WHITE (+) FUSED 12V IGNITION 2 / FLEX RELAY INPUT 87

NO! All of the above to a constant power source.

do i need H3/9 cause my vehicle don't have ignition 2

No.

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.