Viper 5706v, 2010 Hyundai Elantra

Home / the12volt's Install Bay / Car Security and Convenience / Viper 5706v, 2010 Hyundai Elantra (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 10, 2014 at 12:47 PM / IP Logged

Make sure the lights fuse in the alarm casing is in the POS (+) position.

wissam1981

Copper - Posts: 116

Joined: July 24, 2014

Location: Florida, United States

Posted: September 10, 2014 at 1:02 PM / IP Logged

im sure

wissam1981

Copper - Posts: 116

Joined: July 24, 2014

Location: Florida, United States

Posted: September 10, 2014 at 1:17 PM / IP Logged

i just want to solve lock/unlock issue

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 10, 2014 at 1:22 PM / IP Logged

Again check your wiring, make sure you get a NEG (-) from the green on lock/arm and a Neg (-) from the unlock on unlock/disarm.

wissam1981

Copper - Posts: 116

Joined: July 24, 2014

Location: Florida, United States

Posted: September 10, 2014 at 2:03 PM / IP Logged

about the menu 3, feature 2 ( Engine Checking Mode ), which one (opt.1, opt.2, opt.3, opt.4) is the default option ?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 10, 2014 at 2:11 PM / IP Logged

Look at the quick reference guide.

wissam1981

Copper - Posts: 116

Joined: July 24, 2014

Location: Florida, United States

Posted: September 10, 2014 at 2:52 PM / IP Logged

wissam1981 wrote:

about the menu 3, feature 2 ( Engine Checking Mode ), which one (opt.1, opt.2, opt.3, opt.4) is the default option ?

So, i must switch to opt.4 in menu 3 so i can do ( learning Tach ) ?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 10, 2014 at 3:45 PM / IP Logged

Yes.

wissam1981

Copper - Posts: 116

Joined: July 24, 2014

Location: Florida, United States

Posted: September 13, 2014 at 10:16 AM / IP Logged

Hello,

1- i rechecked all the wires ( twice ), all features works fine, except Doors ( lock, unlock ), i think the problem in the 3 pin connector, how to this connector ?

2- i switched the Engine Checking Mode ( menu 3, feature 2 ) to off, whats that mean ?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 13, 2014 at 10:21 AM / IP Logged

1) Check that with your DMM red probe on 12V+, black probe to green wire your meter shows 12V+ on lock only, then place black probe to blue wire, meter should then show 12V+ on unlock only.

2) Trouble

Menu 3 feature 2 should be tach mode.

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.