for viper 5706v pro’s, 2014 tacoma

hey guys I have a 5706v installed in my 2014 Tacoma and everything works great I'm just wondering is there a way to keep the doors locked when remote starting the truck as it sits now when I remote start the truck the doors unlock then if I shut it down or it runs it's set time and shuts down it locks. I was thinking it was the "remote start safe lock" feature but I turned that feature on and nothing changes. Thanks John

Did you connect the keysense?

I don't think I did

just looked at the wiring sheet from viper and I am not seeing a key sense.

Either of the status wires at H2, dark blue or blue white, the key sense wire on your vehicle is I believe BLACK / YELLOW, test, will show ground when key is inserted.

I am using that as my defogger output. H2 = 2nd status output is going to my defogger. H5 = status output is going to my idata immobilizer.

So use the dark blue, if it's used for something else diode block it, failing that pink or pink white NEG aux outputs on H2.

That was my next question Howie you read my mind lol so I can just diode block my H5 dark blue wire if I am reading you correctly.

Yes join to the dark blue, after the join, 2 X 1N4004 diodes, one inline on each branch, bands towards Viper. Also turn off remote start safe lock.

Great thanks for the help John